Hotline

Product Categories

Stone treatment chemicals

 

I.Introduction

Stone is one of the most popular construction materials in the world. However, when constructing buildings, stone often needs to be processed to meet technical and aesthetic requirements. Chemical stone treatment is one of the most popular methods for treating stone.
 
 
 
II.What are stone treatment chemicals?
Stone treatment chemicals are chemical compounds used to treat and clean stone. Different types of stone treatment chemicals are used to remove dirt and stains on stone surfaces, remove salt buildup on stone surfaces, and remove other impurities.
 
 
 
III. Types of stone treatment chemicals
There are many different types of stone treatment chemicals used to treat stone. Here are some of the most common types of stone treatment chemicals:
 
1. Oxalic acid:
This chemical is used to remove stains on stone surfaces, such as rust stains and mold stains.
 
2.Waterproof paint:
Used to create a protective layer on the stone surface to prevent the accumulation of salt and other impurities on the stone surface.
 
3. Cleaning chemicals:
This chemical is used to remove layers of paint, glue, ink and other impurities on stone surfaces.
 
4. Desalination chemicals:
This chemical is used to remove salt buildup on stone surfaces.
 
 
 
IV.How to use chemicals to treat stone
Before using stone treatment chemicals, you need to prepare all the necessary tools including protective gloves, goggles, mask and helmet. In addition, you also need to carefully read the instructions for use of each chemical to ensure proper and safe use.
 
After fully preparing and carefully reading the instructions for use, you can start using stone treatment chemicals. Here are the basic steps to use stone treatment chemicals:
 
1. Clean the stone surface:
Before using stone treatment chemicals, you need to clean the stone surface to remove stains and other impurities. You can use water and a brush to clean the stone surface.
 
2.Dilute chemicals:
For each type of stone treatment chemical, you need to dilute the chemical according to the ratio listed on the chemical's packaging.
 
3.Using chemicals:
Use a brush or suitable material to apply the chemical to the stone surface vertically and evenly.
 
4.Wait and drain:
For the chemical to work best, you need to leave it on the surface of the stone for a certain amount of time. After waiting, you need to rinse with clean water to remove chemicals and impurities on the stone surface.
 
5.Clean tools:
After using chemicals, you need to clean the tools used to avoid unwanted reactions when used next time.
 
 
 
V.Note safety when using chemicals to treat stone
When using stone treatment chemicals, you need to follow safety precautions to ensure the safety of yourself and those around you. Below are some safety notes when using stone treatment chemicals:
 
1. Wear protective gear:
Before starting to use stone treatment chemicals, you need to wear full protective gear such as gloves, goggles, mask and helmet to ensure your safety.
 
2.Read the instructions for use carefully:
You need to carefully read the instructions for use of each chemical to know how to use it properly and safely.
 
3.Avoid direct contact:
You need to avoid direct contact with stone treatment chemicals to avoid unwanted reactions.
 
4.Avoid inhaling chemicals:
When using chemicals to treat stone, you need to avoid inhaling chemicals to avoid harm to your health.
 
5.Keep chemicals out of reach of children:
Stone treatment chemicals are very corrosive, so you need to keep them out of reach of children to avoid unnecessary accidents.
 
6.First aid treatment if exposed:
If you are exposed to stone treatment chemicals, you need to get first aid treatment immediately to avoid harm to your health.
 
 
 
VI.Frequently asked questions about stone treatment chemicals
1.What are stone treatment chemicals?
Stone treatment chemicals are chemicals used to remove stains and impurities on stone surfaces.
 
2.How many types of stone treatment chemicals are there?
There are many different types of stone treatment chemicals, including acidic, alkaline, oxidizing and antiseptic chemicals.
 
3. Are there any types of stone that cannot be cleaned with stone treatment chemicals?
Stones such as marble, lapis lazuli, porcelain and natural stone should not be cleaned with stone treatment chemicals as they can be corroded by these chemicals.
 
 
 
VII.Conclusion
Chemical stone treatment is an effective method for cleaning stains and impurities on stone surfaces. However, the use of stone treatment chemicals needs to be done properly to ensure health safety and avoid harm to the environment.
 
Before using stone treatment chemicals, you need to carefully read the instructions for use and wear full protective gear to ensure your safety. You also need to avoid direct contact with the chemical and keep it out of reach of children. If you are exposed to chemicals, you need to get first aid treatment immediately to avoid harm to your health.
 
In addition, the use of stone treatment chemicals needs to be done properly to ensure effectiveness and avoid harm to the environment. You need to choose the right chemical for the type of stone to be cleaned and use the correct prescribed dosage. You should also check the safety of chemicals before using them

Above is basic information about stone treatment chemicals and how to safely use these chemicals. Hopefully this article will help you in the stone cleaning process and protect your health and the environment.


NAMAN USA LLC

1601 ELM ST STE 4360 DALLAS, TX 75201-4701

Website:

https://namanusa.com

Email

s.rachel@namanusa.com

Hotline:  +1 214 470 1300

 

Copyright © NAMAN USA LLC.
messenger icon zalo icon